Loading ...
Loading ...
Loading ...
40
Installing wine display kit
Handle assembly
Retainer blocks are pre-assembled at the bottom of both ends of the handle.
Cradle assembly
A retainer block is pre-assembled at the bottom of each cradle.
WINE DISPLAY
Align handle to the front end of
display rack.
2
Insert retainer block at desired
location between slats of display
rack. Do not tighten.
4
Place ‘cradle guide’ on the slats
behind the handle..
Align cradle on spacer based on
size and type of wine bottle.
5
Rotate the retainer block to lock
position, and tighten screw.
Remove cradle guide from the rack
after use.
6
Loosen the screws until the retainer
blocks can be inserted between slats
of display rack.
1
Rotate retainer block to lock
position and tighten screw to lock
handle in place.
3
Write the name or type
of wine on the label.
Installing wine label kit
7
Fit label over front edge of rack to
match displayed wine.
8
Wipe the labels with a damp cloth
to erase.
9
IMPORTANT!
Use spacer to correctly position cradle and avoid wine bottles being too upright resulting in
bottles tipping over.
Loading ...
Loading ...
Loading ...