Loading ...
Loading ...
Loading ...
34
Top
bracket
Side brackets
Tools
Cross-head screwdriver
M4 hex key
(1)
13mm spanner
(1)
INSTALL DOOR PANEL
Adjusting door panel
IMPORTANT!
Check gaps 1/8" (3mm) between door panel/cabinetry using depth gauge. All
door panels have full axis adjustment to ensure flushness with adjacent walls.
Height adjustment
Turn Adjustment screw to raise or lower the
height of door panel relative to door. Continue
adjustment until gap with cabinetry is more
than 3mm.
1
2
4
Loosen screw at bottom of door, and slide locking bracket
until it touches the panel. Fix the locking bracket to door
panel with 8Gx16 countersunk screw.
5
To adjust door panel further, remove door panel then loosen
the fixing screws of hanging bracket and move the bracket
sideways to suit.
3
Lower
Raise
Depth adjustment
Loosen side screws on both sides of door,
and slide door panel forward/backward.
Re-tighten once satisfied.
Once satisfied with door panel position, fully tighten
M8 washer and nut to adjustment screw.
Loading ...
Loading ...
Loading ...