Loading ...
Loading ...
Loading ...
- 6 -
Ana-Digi QFL133
Normal Time Display
1. Press A to change mode. Mode sequence is normal time display, alarm,
chronograph, and time/calendar setting.
2. Press B for EL.
3. Press C to toggle 12/24-hour time.
NOTE: In any setting mode, if no pusher is operated for 2 minutes, all changes
will be saved and the setting will automatically return to normal time display.
Time and Calendar Setting
1. Press A to change to time/calendar setting mode; seconds will begin flashing.
2. Press C to set seconds to zero.
3. Press D to advance to next setting value.
4. Press C to increase digit, press and hold C for fast advance.
5. Setting sequence is: seconds, hour, minute, month, date and weekday.
6. Press A to exit setting mode.
Alarm Mode
1. Press A to change to alarm mode.
2. Press C to toggle alarm/chime on/off.
3. Alarm will sound at preset time for 20 seconds; press C or D to silence alarm.
Alarm Setting
1. In alarm mode, press D to enter setting mode; hour will begin flashing.
2. Press C to increase hour; press and hold C for fast advance.
3. Press D to set and advance to minutes.
4. Press C to increase minutes; press and hold C for fast advance.
5. Press D to save data and exit setting mode; press A to save data, exit setting
mode, and return to normal time display.
C
D
B
A
Ana-Digi QFO-017 / Y121E6, QFO-016 / Y121E4
Time and Calendar Setting
1. Press A for EL.
2. Press and hold C for 2 seconds for the time setting state and you will see the
seconds flashing.
3. Press D to reset time to zero.
4. Press B to toggle through the following setting sequence:
Second – Minute – Hour – 12/24-hour format – Month – Day – Year
5. Press D to adjust the flashing item.
6. The day of the week is automatically displayed in accordance with the date
(month, day, year).
7. Press C to return to Real Time Mode.
Alarm Mode
1. Press B to change to alarm mode.
2. Press D to turn on/off the Alarm or Chime.
3. Alarm will sound at preset time for 20 seconds.
Alarm Setting
1. In alarm mode, press and hold C for 2 seconds to select the “Hour” setting.
2. Press B to select the “Minute” setting.
3. Press D to adjust the flashing item.
Chronograph Mode
1. Press B to change to chronograph mode.
2. Press D to start/stop the chronograph.
3. Press C and hold to reset chronograph to zero.
4. Press C while chronograph is running to display split count.
5. Press D to exit the split count and stop counting.
6. Press C and hold to reset chronograph to zero.
D
C
A
B
D
C
A
B
Countdown Timer
1. Press B to change to timer mode.
2. Press and hold C for 2 seconds to display the timer setting.
3. Press B to select “Hour” or “Minute” and press D to adjust the flashing item.
4. Press C to complete the setting.
5. Press D to start/stop the timer.
6. Press C and hold to reset the timer.
Dual Time
1. Press D to change to dual time mode.
2. Press and hold C for 2 seconds to select the “Minute” setting.
3. Press B to select the “Hour” setting.
4. Press D to adjust the flashing item.
5. Press C again to complete the setting.
Chronograph Mode
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press D to reset to zero.
Split Time
1. Press D while the chronograph is running for split time.
2. Press D again to return to chronograph.
3. Repeat steps 1 and 2 to measure multiple split times.
4. Press C to finalize timing.
5. Press D to reset to zero.
QFO-017 / Y121E6 QFO-016 / Y121E4
Loading ...
Loading ...
Loading ...