Loading ...
Loading ...
Loading ...
Manual Clean Oven Control
(:selectmodels:)
BAKE
BROIL
TIMER
CLOCK
CANCEL
A (More) or
T (Less)
Use for baking and roasting.
Usefor broiling and top browning.
Sets timer.
Use to set time-of-day clock.
Cancels all operations except timer
and clock.
Enters or changes time, oven
temperature. Sets HI or LO broil.
Using the Touchpads
• Press the desired pad.
• Press the A or V pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the A or V pad.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the A or T pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the A or V pad, the function will be canceled and the
display will return to the previous display.
Setting the Clock ...................................
CLOCK
1. Press the CLOCK pad. .........
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
2. Set the correct time of day using the A or V pads. If the A
or V pad is not pressed within 30 seconds, the program
will cancel. Pressthe CLOCK pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours and
59 minutes (99:59). Time will be displayed in minutes and not
in seconds. THE TIMER DOES NOT CONTROL THE OVEN.
Press the TIMER pad.
• 0:00 will light and the colon (:) will flash in TIME£
the display. ...........................
Press the A or V pad until the desired time is displayed.
• The timer will begin as soon as the time is set.
° The flashing colon indicates that a timing operation is in
progress. 0-he colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. "0:00"
will appear in the display.
If desired, press the CLOCK pad and the time of day will
briefly reappear in the display during a timing operation.
If desired, press the BAKE or BROIL pads and the
current temperature setting will briefly reappear in the
display during a timing operation.
To cancel the timer operation:
Press and hold the TIMER pad for several seconds.
Setting the Controls For Baking or Roasting:
1. Press BAKE pad.
° 000 will light and the Bake indicator light BAKE
will flash in the display. " ................
If you press the BAKE pad and do not set an oven temp-
erature within 30 seconds, the program will automatically
cancel and the time of day will reappear in the display.
2. Press the A or V pad until the desired oven temperature is
displayed.
° The oven temperature can be set from 170° to 550° F.
• 350° will appear in the display when either A or V pad
is pressed once.
Press and tap the A or V pad to change the oven temp-
erature by 5° increments or press and hold the A or V
pad to change the oven temperature by 10° increments.
100° or the actual oven temperature, whichever is higher,
will appear in the display when the oven turns on.
° The temperature in the display will increase in 5°
increments until preset temperature is reached. A single
beep will sound when the oven is preheated.
° Allow 10 to 15 minutes for the oven to preheat.
• To recall preset temperature during preheat, press the
BAKE pad. The temperature will be displayed for three
seconds.
° To change oven temperature during cooking, press
the Bake pad, then press the A or V pad until tile
desired temperature is displayed,
° To change oven temperature during preheat, press
the Bake pad twice, then press the A or V pad until
the desired temperature is displayed.
Place food in the oven. Check food for doneness at the
minimum cooking time.
13
Loading ...
Loading ...
Loading ...