Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
189
Fitting the stainless-steel hose to the
steam oven
Only use the stainless-steel hose
supplied. The stainless-steel hose
must not be shortened, extended or
replaced by a different hose.
A faulty stainless-steel hose must
only be replaced by a genuine Miele
replacement. The food-grade, stain-
less-steel hose is available to order
from the Miele webshop, from the
Miele Customer Service Department
or from your local Miele dealer.
The stainless-steel hose supplied is
2000m long.
Remove the cover cap from the
mains water connection at the back
of the steam oven.
Take the angled end of the stainless-
steel hose and check whether there is
a sealing washer. Fit one if necessary.
Screw the coupling nut on the stain-
less-steel hose onto the threaded
connection.
Ensure that the threaded union is
properly connected and does not
leak.
Connecting the water supply
Disconnect the steam oven from
the power supply before connecting
it to the water supply.
Close the stopcock before connect-
ing the steam oven to the water sup-
ply.
Make sure that the stopcock remains
accessible after the steam oven has
been installed.
A stopcock with 3/4" thread must be in-
corporated when connecting the steam
oven to the water supply.
Check that a sealing washer is fitted.
Fit one if necessary.
Connect the stainless-steel hose to
the stopcock.
Ensure that it is screwed into position
correctly.
Turn on the water supply stopcock
slowly and check for leaks.
Correct the position of the seal and
screw thread if appropriate.
Loading ...
Loading ...
Loading ...