Loading ...
Loading ...
Loading ...
Problem solving guide
173
Problem Cause and remedy
The control panel will
not open or close auto-
matically despite touch-
ing the sensor sev-
eral times.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive and can pre-
vent the panel opening or shutting if it picks up a sig-
nal.
Open/close the control panel manually (see end of
this section)
If the problem occurs again, contact Miele Service.
The Start at and Finish at
functions are not avail-
able.
The temperature in the oven compartment is too
high, e.g. after a programme has finished.
Open the door and let the oven compartment
cool down.
These functions are not generally available in main-
tenance programmes.
Cakes and biscuits are
not cooked properly
after following the dura-
tions given in the re-
cipe.
The temperature set is not the same as the one given
in the recipe.
Change the temperature.
The recipe has been altered. For example, adding
more liquid or eggs can increase the cooking dura-
tion required.
Adapt the temperature and/or cooking duration to
the altered recipe.
Cakes or biscuits are
unevenly browned.
The set temperature was too high.
More than two levels were used for baking.
Bake on a maximum of two levels.
F10 The suction tube in the water container
– is not fitted correctly.
– is not positioned vertically.
Connect it properly and make sure it is vertical:
Loading ...
Loading ...
Loading ...