Loading ...
SECTION PAGE
Warranty ............................................ 2
Product Specifications ................................ 2
Safety Instructions ................................... 3
Accessories and Attachments .......................... 6
Hardware Package Contents ............................ 6
Know Your Table Saw ................................. 8
Assembly and Adjustments ............................ 9
Changing the Blade ................................... 11
Operation ........................................... 16
Maintenance ......................................... 20
Troubleshooting Guide ................................ 21
Parts Pages ......................................... 22
FULL ONE-YEAR WARRANTY ON CRAFTSMAN TABLE SAW
If this Table Saw fails due to a defect within one year from the date of purchase,
CONTACT THE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES and
Sears will repair it, free of charge.
This warranty applies only while this product is in the United States.
If this Table Saw is used for commercial or rental purposes, this warranty will apply for
ninety days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179
MOTOR
Maximum developed HP ......... 2.5
Volts ........................ 120
Amperes ..................... 13
Hertz ....................... 60
RPM (no load) ................ 5000
Overload protection ............. YES
SAW
Table ....................... 16 x 26 inches
Blade ....................... 10" x 5/8" arbor
Base ........................ ABS
Maximum depth of cut at g0° ..... 3 inches
Maximum depth of cut at 45° ..... 2-1/; inches
Maximum width of dado ......... 1/2 inch
Weight ...................... 56 pounds
To avoid electrical hazards, fire hazards, or damage
to the tool, use proper circuit protection.
Your saw is wired at the factory for 120v operation.
Connect to a 120v, 15 amp branch circuit and use a
15 amp time delay fuse or circuit breaker. To avoid
shock or fire, replace power cord immediately
if it is worn, cut or damaged in any way.
Page 2
Loading ...
Loading ...
Loading ...