Loading ...
Loading ...
Loading ...
up
- You can easily connect the Plasma Display to your PC for outstanding image and sound.
Use the Monitor to display images and:sound from a PC Computer source.
Setup Instructions to Connect a PC to your Monitor
• If the image output of the PC is set higher than
UXGA, no picture will appear on the Monitor.
(UXGA is not supported.)
• Connect the signal cable from the monitor Output
port on the PC to the RGB-PC INPUT
(VGAiSVGA/XGA/SXGA) port on the Monitor.
• Connect the audio cable from the PC to the Audio
ports of the Monitor_ (Audio cables are not supplied
with the Monitor.)
° To set up the Monitor to operate within a PC win°
dows environment, select Norma_, Standard or
o
J
Default monitor:
The Monitor can not be us_ for Plug and Play
functionality.
If your PC computer is equipped with a sound card,
adjust the sound output on the PC.
It is recommended that the resolution output of the
PC should be set to t280 x 720 to get the best
quality picture, (Look for a video card that uses the
nV_D_A GeForce 2 pro or similar chipset that
supports this resolution)
Back panel of the Monitor
video/_
Ot_ the remote control
PC Setup
. First, turn on the PC computer and press the ON/OFF button on the
Monitor to apply power to it. Second, turn on the display by pressing
the (b/_ button on the Monitor or by pressing the POWER button on
the Monitor's remote control,
° Use the video/pc button on the remote control to select the RGB
input source.
, Set the resolution output of the PC to SXGA or under (1280 x 1024,
75Hz). (Refer to page 21 .)
2O
• Avoid keeping a fixed image on the MonitoCs screen for a long period of time. The fixed image may
become permanently imprinted on the screen; use a screen saver when possible.
• If the resolution output of the PC computer is over SVGA, connect the PC to the RGB-PC
(VGA/SVGA_XGA!SXGA) input port on the Monitor. Change the PC computer resolution output
accordingly.
Loading ...
Loading ...
Loading ...