Loading ...
Loading ...
Loading ...
INSTALLATION
Gas Information
When switching from one type of gas to another, the minimum flow rate must be adjusted so the
flame should not go out. To regulate the flame follow the following steps:
• Light up the burner
• Turn the knob to minimum level
• The adjustment screw is located in the center of the shaft (fig.21 ). Please remove/pull out the
control knob to access it.
•
• Using a screwdriver with max. diameter 1 3/16" mm, turn the screw inside the tap until the
correct setting for the correct flame is obtained.
Loading ...
Loading ...
Loading ...