Loading ...
Loading ...
Loading ...
Rinnai Australia 6 Operation Manual
IMPORTANT INFORMATION
To clean your water controller(s) use a soft damp
cloth with a mild detergent.
Do Not use solvents!
Whilst hot water outlets are open the set temperature
may be lowered. However they cannot then be raised
above 43°C. In addition transfer of 'priority' between
controllers is not possible. These are safety features.
Depending on the weather conditions and the length
of the pipe between the hot water unit and the outlet
in use, there may be a variation between the
temperatures displayed at the water controller(s) and
the temperature of the water at the outlet.
There is no need to turn the water controller(s) off
after use. However, if you prefer to turn the water
controller(s) off, selected temperatures to a maximum
of 50°C will be stored in the system memory at all
times whilst mains power remains connected.
As a safety precaution, if a Kitchen Controller's
temperature is set above 50°C, transferring and then
returning 'priority' to the Kitchen Controller will result
in a default set temperature of 50°C being selected.
This is a safety feature.
Do Not push the On/Off button on any Controller
when the ‘Red’ water heater ‘In Use’ indicator is
illuminated as this will turn off the water heater
causing the water to go cold. Someone maybe in the
middle of having a shower or filling a bath.
S
O
L
V
E
N
T
Max.
43°C
49°C
50°C
Kitchen
Kitchen
Bathroom
Loading ...
Loading ...
Loading ...