Loading ...
Loading ...
Loading ...
Rinnai Australia 42 Installation Manual
COMMISSIONING
GAS PRESSURE SETTING
The regulator is electronically controlled and factory pre-set. Under normal circumstances it does not
require adjustment during installation.
Make adjustments only if the unit is not operating correctly and all other possible causes for incorrect
operation have been eliminated.
Instructions for gas pressure setting are located in the instruction pocket inside the appliance front
cover.
COMMISSIONING CHECK LIST
A commissioning check list is provided on the appliance front cover to enable the installer to step
through the correct commissioning procedure when installing a Rinnai Continuous Flow water heater.
The check list can also assist the installer to identify potential installation errors that may prevent the
appliance from operating correctly.
Wiring Diagram
The wiring diagram is located in the instruction pocket inside the appliance front cover.
Recess Box:
These allow the appliance to be recessed into the cavity of the wall saving precious space. Suitable
for painting.
Security Cage:
Protect the gas booster unit from theft and damage.
Security Bracket:
Prevent theft of the gas booster by securing it with the custom security bracket.
Sideways Flue Diverter
Designed to redirect flue products when the gas booster is installed on a balcony.
Contact Rinnai for further information about our accessory range and model suitability details.
Please take a moment to record the following information below for your own records.
For all injector size and gas pressure values refer to the appliance data plate, located
on the left hand side of the water heater.
Model No: REU- Serial No:
Your Retailer:
Address:
Contact Number: ( )
Purchase Date: / /
Your Installer:
Address:
Installers License No.:
Contact Number: ( )
Installation Date: / /
Certificate of Compliance No.:
NOTE
ACCESSORIES
PRODUCT RECORDS
Loading ...
Loading ...