Loading ...
Loading ...
Loading ...
Cleaning aid en
23
Cleaning set-
ting
Cleaning
level
Duration in hours
1 Low Approx. 1:15
2 Medium Approx. 1:30
3 High Approx. 2:00
Select a higher cleaning setting for heavier or older
soiling.
The duration cannot be changed.
3.
Touch the button.
Refer to the messages in the display.
4.
Use the button to start the cleaning function.
a After a few seconds, the cleaning function starts and
the duration counts down.
a For your safety, the appliance door locks shortly
after the function starts. appears in the display.
a When the cleaning function ends, the duration is at
zero in the display.
5.
Press to switch the appliance off.
When the appliance has cooled down, the appliance
door is unlocked and goes out.
17.3 Preparing the appliance for use
following the cleaning function
1.
Allow the appliance to cool down.
2.
Wipe off any ash that has been left behind in the
cooking compartment and around the appliance
door with a damp cloth.
3.
Remove white residues with lemon juice.
Note:White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
4.
Attach the shelf supports.
→"Shelf supports", Page24
18 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. It is then
easier to remove dirt.
18.1 Setting the cleaning aid
WARNING‒Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
▶ Never pour water into the cooking compartment
when the cooking compartment is hot.
Requirement:The cooking compartment has cooled
down completely.
1.
Remove the accessories from the cooking compart-
ment.
2.
Mix 0.4litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
Do not use distilled water.
3.
Use the function selector to set the Bottom
heating type of heating.
4.
Use the temperature selector to set 80°C.
5.
Touch the button and use the function selector to
select the duration .
6.
Use the temperature selector to set the duration to
four minutes.
a After a few seconds, the appliance starts heating
and the duration counts down.
a When the duration has counted down, a signal
sounds and the duration is at zero in the display.
7.
Switch off the appliance and leave the cooking com-
partment to cool down for 20minutes.
18.2 Recleaning the cooking compartment
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶ After using the cleaning assistance, wipe the cook-
ing compartment and allow it to dry completely.
Requirement:The cooking compartment has cooled
down.
1.
Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2.
Clean the smooth surfaces in the cooking compart-
ment with a dish cloth or a soft brush. Remove stub-
born food remnants using a stainless steel scouring
pad.
3.
Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4.
Once the cooking compartment is cleaned suffi-
ciently:
‒ To allow the cooking compartment to dry, open
the appliance door to the stop position (approx.
30°) and leave it open for approx. onehour.
Loading ...
Loading ...
Loading ...