Loading ...
Loading ...
Loading ...
Before Setting Oven
Controls
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATINGTHE OVEN). Always useoven mitts when using the oven.
Oven Vent Location
The oven vent islocated under the left rear surface element. When the oven
is on, warm air is released through the vents. This venting is necessaryfor
proper air circulation in the oven and good baking results,
REMOVING & REPLACING OVEN
RACKS
To remove, pull the rack forward until
it stops. Lift up front of rack and slide
out. To replace, fit the rack onto the
guides on the oven walls. Tilt the fronl
of the rack upward and slide the rack
back into place.
ARRANGING OVEN RACKS WITH 5
RACK POSITIONS
To bake on 1 rack, place the rack on
position 3 or 4. To bake on 2 racks,
place the racks on positions 2 and 4.
_1st RackPosition
2nd RackPosition
-3rdRackPosition
•4thRackPosition
-5thRackPosition
Setting Oven Controls
To Set or Change the Temperature for Normal Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F
(65°C to 287°C).
To Set the Controls for Normal Baking:
1. Push f_. ' • appears in the display.
2. Within 5 seconds, push the _ or _. The display will show "350°F
(177°C)." By holding the _ or _, the temperature can then be
3.
Note: The oven function will not work
if the time of day clock is not set.
Note: The oven control has a built-inl 4.
safety feature that will shut off the I
oven if the control is left on for more I To
than 11 hours 59 minutes. I 1.
2.
adjusted in 5°F (1°C) increments.
As soon as the _ or _ isreleased, the oven will begin heating to the
selected temperature. When the displayed tern perature reaches the desired
baking temperature, the control will beep 3 times.
baking function, push _.
To cancel the
Change the Oven Temperature after Baking has Started:
you are using the minute timer, push _ and make sure the bake
If
temperature is displayed.
Push the _ or _ to increase or decrease the set temperature.
9
Loading ...
Loading ...
Loading ...