Loading ...
Loading ...
Loading ...
Oven Cleaning
(continued)
_lr_ Use care when opening
the oven door after the self-cleaning 1
cycle. Stand to the side of the oven
when opening the door to allow hot air I
or steam to escape. J
DO NOT force the oven
door open. This can damage the
automatic door locking system. Use
caution when opening the door after
the self-cleaning cycle is completed.
The oven may still be VERY HOT.
To Start the Self-Clean Cycle
*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for
average to heavy soils (to assure satisfactory results).
To Set the Controls for a Self-Clean Cycle:
1. Be sure the clock shows the correct time of day.
2. Push _). •.... ' appears in the display.
3. Pushthe _ until "3:00" appears in the display for a 3 hour cycle, or push
the _ until "2:00' appears in the display for a 2 hour cycle.
4. As soon as the _ or _ is released, "CLn"appears in the display.
5. As soon as the controls are set, the motor driven lock will begin to close
automatically and the "LOCK" indicator light will flash. DO NOT open the
door while the light is flashing (it takes about 15 seconds for the lock to
close).
6. The"LOCK'lightwinglowuntilthecleaningcycleiscompletedorcancelled,
and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. Thetime of day will appear inthe displaywindow and the'LOCK" light will
continue to glow.
2. Oncethe oven hascooled down for about I HOURand the'LOCK' light has
gone out, the oven door can be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive
smoke or fire:
1. Push CLEAR.
2. Once the oven has cooled down for about l HOUR and the %OCK" light has
gone out, the oven door can be opened.
3. Correct the condition which caused the smoking.
4. Restart the self-clean cycle once all conditions have been corrected.
13
Loading ...
Loading ...
Loading ...