Loading ...
Loading ...
Loading ...
bluestarcooking.com 9
Step 2 — Install Anchor Bracket (continued)
Install the anchor bracket on the back wall of the
enclosure. The notch in the back of the bracket
should be centered in the enclosure (from side to
side). Secure the anchor bracket with at least two
screws spaced far apart, close to the sides of the
bracket. Wood screws and self drilling sheet metal
screws are located in the plastic bag with the
literature. Screws must be securely threaded into
wood or metal studs that are structurally sound and
part of the building structure.
Step 3 — Route Water Line
Locate the household water line as shown below prior
to moving the refrigerator into position. It may be
helpful to tape the water line to the floor to avoid
damaging it as the refrigerator is rolled into position.
Tip Over Hazard
Anchor bracket must be installed properly to prevent
refrigerator from tipping. Failure to follow these
instructions can result in death or serious injury.
Risque de renversement
Le support d'ancrage doit être installé correctement pour
empêcher le renversement du réfrigérateur. Le non-
respect de ces instructions peut entraîner la mort ou des
blessures graves.
WARNING
AVERTISSEMENT
81”
To Floor
To Floor
Back Wall of Enclosure
84”
Installation Instructions
Loading ...
Loading ...
Loading ...