Loading ...
Loading ...
Loading ...
12 (877) 427-3290
Installation Instructions
Step 7 — Align Doors (continued)
Retighten the five bolts with a 5/16” hex head socket.
Bolts need to be tightened to 50 in. lb. It is normal for
the door(s) to lower and tilt slightly when loaded with
food.
Replace the hinge bracket cover with two Phillips
screws.
Repeat process for the bottom of the door(s).
On french door models, repeat the process for other
door.
Freezer Drawer
Important: Adjust one side at a time.
Loosen the two bolts from the side mounting bracket
and the divider from the center of the drawer with a
5/16” hex head socket.
Slide the door up or down as necessary to achieve
uniform gaps between the upper door(s) and lower
drawer.
Retighten the bolts and screw with a 5/16” hex head
socket. Bolts needs to be tightened to 50 in. lb.
Repeat process for the other side.
Step 8 — Align Top Grille
Only adjust the top grille if necessary to achieve uniform
gaps and proper alignment.
Top grille can be adjusted vertically where the hinge
attaches to the grille. The grille can be adjusted
horizontally where the hinge base is attached to the
upper cabinet frame.
Loosen the Phillips screws and adjust the grille.
Retighten screws.
Step 9 — Anchor Refrigerator
Tighten the anchor bolts through the top of the cabinet
to the anchor bracket with a 1/2” socket wrench. Close
the top grille.
Step 10 — Install Toe Grille
Attach the upper toe grille to the brackets at the base of
the refrigerator using one black Phillips screw on each
side. Brackets may be adjusted side to side to improve
the fit to the enclosure.
Attach the lower toe grille using one black Phillips
screw on each side. Bottom of the toe grille should rest
on the floor.
Adjust
Loosen
Loading ...
Loading ...
Loading ...