Loading ...
Loading ...
Loading ...
bluestarcooking.com 11
Step 6 — Level Refrigerator
The height adjustment for the front and back can be
made from the front of the refrigerator. Turn the hex
bolt clockwise with a 1/2” socket wrench to raise the
refrigerator or counterclockwise to lower it. The
refrigerator is designed to raise a maximum of 1” from
the shipped position. Do not attempt to raise the
refrigerator beyond that point as damage to the
leveling system will occur.
Important: Do not use a power drill and do not
over-tighten the leveling bolts.
Once the refrigerator is level, extend the front feet to
the floor with a 1/2” open end wrench and hand-
tighten an additional half turn. The feet will help
stabilize the refrigerator.
Tip Over Hazard
Front leveling legs must be firmly in contact with the floor
to reduce the possibility of the refrigerator tipping forward.
Failure to follow these instructions can result in death or
serious injury.
Risque de renversement
Les pieds de nivellement avant doivent être fermement
en contact avec le plancher pour réduire le risque de
renversement du réfrigérateur vers l'avant. Le non-
respect de ces instructions peut entraîner la mort ou des
blessures graves.
Step 7 — Align Doors
Only adjust the doors if necessary to achieve uniform
gaps and proper alignment.
Refrigerator Door(s)
Important: Adjust the top hinge cam(s) or bottom hinge
cam independently. Do not loosen the top and bottom
hinge bolts at the same time.
Remove the hinge bracket cover by removing two
Phillips screws.
Slightly loosen the four bolts and the cam bolt with a
5/16” hex head socket.
Using a flat blade screwdriver, turn the cam clockwise
or counterclockwise to move the door left or right as
necessary to achieve uniform gaps on the sides and/
or between the upper door(s) and lower drawer.
Adjust
Up
Back
Front
WARNING
AVERTISSEMENT
Installation Instructions
Loading ...
Loading ...
Loading ...