Loading ...
Loading ...
Loading ...
8 (877) 427-3290
Installation Instructions
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed. Use two or more people to move
and install refrigerator. Failure to follow these instructions
can result in death or serious injury.
Risque de renversement
Le réfrigérateur est très lourd et se renverse facilement
quand il n'est pas complètement installé. Deux personnes
ou plus doivent déplacer et installer le réfrigérateur. Le
non-respect de ces instructions peut entraîner la mort ou
des blessures graves.
Tools and Materials
Phillips screwdriver
Flat blade screwdriver
Power drill and drill bits (for anchor bracket)
Stud finder (for anchor bracket)
1/2” socket wrench
Tubing cutter (for water line)
3’ of 1/4” OD copper, braided stainless steel, or PEX
tubing (for water line)
Saddle valve (for water line)
1/2” open end wrench
5/16” hex head socket
Gloves
Safety glasses
Step 1 — Uncrate and Inspect Refrigerator
Before starting the installation, uncrate and inspect
the refrigerator. Remove the packing materials but do
not discard the anchor bracket, toe grille, and
associated hardware.
Step 2 — Install Anchor Bracket
The anchor bracket is attached to the top of the
refrigerator during shipping. Remove it by lifting the
top grille and removing the two bolts with a 1/2”
socket wrench. Save the bolts and any washers to
use when anchoring the refrigerator in the final
position in Step 4.
WARNING
AVERTISSEMENT
Loading ...
Loading ...
Loading ...