Loading ...
Loading ...
Loading ...
8
Before Setting Oven Controls
Removing and Replacing Glide Racks
The fully extendable glide rack makes food preparation easier.
This oven rack has glide tracks that allow the rack to be pulled
away from the oven without rubbing the sides of the oven wall.
When checking on food simply pull the rack towards you. The
glide rack is designed to allow you to extend food away from
the oven.
T
o remove the glide rack from the oven:
To remove - Using one hand, reach through handle opening and
lift up on the release lever located across the lower front of the
rack as shown in figure 3.
While holding up the release lever, pull the glide rack out of the
oven until the stop position is reached
Using both hands, grasp the upper and lower portions of the
glide rack. Lift up the front of the rack slightly and continue to
pull the rack away from the oven.
Be sure to grasp both upper and lower rack portions together
when removing or handling the glide rack. The rack portions
move independently and are difficult to handle unless held
together.
T
o replace - grasp both upper and lower portions of glide rack,
lift and hold the rack level between the oven cavity walls. Tilt
the front of the rack upward slightly and slide the rack
completely into position.
To see how to properly maintain your porcelain glide racks see
“Caring for the glide racks” in the Care and Cleaning section
on page 26.
Important note: To prevent possible damage to the oven, do not
attempt to close the oven door until all the oven racks are fully
positioned back inside the oven cavity.
Figure 3: Grasp handle and lift up on bar
Figure 4: Pull rack to stop position
Figure 5: Remove and replace using both hands
Loading ...
Loading ...
Loading ...