Loading ...
Loading ...
Loading ...
20
Setting Oven Controls
A
djusting the Oven Temperature
The temperature in the oven is pre-set at the factory. When first
using the oven, be sure to follow recipe times and temperatures.
Important note: Do not use oven thermometers such as those
found in grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much as 20 to
40 degrees from actual temperatures.
Before adjusting, test a recipe by using a temperature setting
higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is
needed.
If you think the oven is cooking too hot or too cool for the
temperature you select, you can adjust the actual oven tempera-
ture to be more or less than what is displayed by accessing the
UPO (User Programmable Offset).
I
mportant: Before making a temperature adjustment, make sure
both the oven mode and oven temperature control knobs are in
the OFF position. Changing the UPO will affect both oven
cavities.
T
o adjust the oven temperature:
1. When the oven is idle, press and hold the light key for 3
seconds until the display sounds an acceptance chime. AUd
should appear in the display.
2
. Press the key until UPO appears and the default
setting of
0° (or the last offset temperature) is showing.
3. Press the or key until the desired temperature
change (offset) is reached. The display will change ± 5°
with each key press to a maximum of + 35° or a minimum
of – 35°F.
Once the new offset appears in the display, release the key and
the control will accept the change.
4
. To return the display to normal, press and hold until an
acceptance chime sounds. The display will return to show
the time of day.
Note: Changing the UPO will not affect the broil or self clean
temperatures.
Restoring Factory Default Settings
Your appliance was set with predetermined (default) oven
control settings. The following options have settings that can be
modified and may have been changed since the appliance was
new:
•
Continuous bake or 12 hour energy savings mode (ES)
•
Silent or audible control (Aud)
• Oven temperature adjustments (UPO)
T
o rest user preferences to original factory setting:
1. Press and hold the light key for 3 seconds until the display
changes to show a user preference.
2. Use the to scroll until rST appears.
3. Press the arrow key on the right side of the display until yES
appears in the display and release the key.
4
. The control will accept the change and all the user prefer-
ences will return to factory settings (default).
5. To exit the user preferences, press and hold the for 3
seconds and the display will return to show the time of day.
I
mportant: Choosing the yES reset option will return all user
preferences to their default settings.
Figure 21: UPO shown at default setting
Figure 22: UPO set to +10° (L) and -10° (R)
Figure 23: Control ready to reset to default
Loading ...
Loading ...
Loading ...