Loading ...
Loading ...
Loading ...
3130
CULTIVATOR EDGER PRUNING SAW HEDGE TRIMMER BRUSHCUTTER
Sections
Brushcutter 2
Hedge Trimmer 18
Pruning Saw 30
Edger 44
Cultivator 52
About This Manual
Thank you for purchasing this product. This instruction manual
describes operating procedures and precautions as well as
inspection and maintenance procedures for the machine.
Before using this device, read this manual carefully until you are
familiar with the contents. Carefully observe all warnings and safety
instructions to ensure correct operation of the machine. Doing so
will ensure safe operation and optimum performance of the device.
This instruction manual covers the attachments, controls, and
engine of the Multi-Combination System. Use only attachments
specified by the manufacturer. Use of any other attachment can
result in damage to the equipment, possibly leading to death or
severe injury.
Be sure to strictly observe the important safety information that
follows each bulleted term below. Failure to follow the instructions
for correct operation contained herein can result in a severe
accident.
DANGER: Indicates that failure to follow the instructions creates
an imminent hazard leading to death orsevere injury.
WARNING: Indicates that failure to follow the instructions has
the potential to result in death or severe injury.
CAUTION: Indicates that failure to follow the instructions can
lead to minor injury or severe damage to the machine.
NOTE This is an auxiliary explanation that provides useful
information and instructions.
Contents
Meaning of pictographs 30
Technical Data 31
Names of Parts 32
Safety Instructions 33
Ensuing Safe Operation 35
Assembly 36
Wearing the Harness 39
Inspection and Maintenance 40
Long-term Storage 41
Troubleshooting 42
Meaning of Pictographs
DANGER - WARNING - CAUTION
Before using this device, read this
manual carefully until you are familiar
with the contents.
Face shield or protective goggles.
Wear safety gear.
1. Face shield or protective goggles
2. Head protection
3. Ear protection
4. Heavy-duty gloves
5. Non-slip safety shoes
• Keep the working end of the
machine at least 15 m away from
overhead power lines, telephone
wires, and all other cables.
• Do not operate the device within
15 meters of a child, animal, or
bystander.
Turning the chain oil flow adjuster clock-
wise decreases the chain oil feed rate;
turning the adjuster counterclockwise
increases the chain oil feed rate.
(1) Turn the locking screw of the chain
oil flow adjuster counterclockwise
by one full turn to unlock the chain
oil flow adjuster.
(2) Adjust the chain oil feed rate with
the chain oil flow adjuster.
(3) After adjusting the chain oil feed
rate, turn the locking screw of the
chain oil flow adjuster clockwise to
lock the chain oil flow adjuster.
Technical Data - Pruner Saw
Mases Unit with specified cutting attachment, empty tank 5.74kg
Cutting Attachment
Type Pruner Saw
Overall length (715mm pruning saw & 330 saw) 1045mm
Saws chains length 225mm
Tooth Pitch and Gauge
3/8 x 0.042”
(9.53 x 1.07mm)
Number of drive links 39
Chain specification Oregon LY/T1187 JL9-3
Guide bar size 10” (250mm)
Sproket 7T
Oil tank volume 100mL
Oil pump Plunger type
External dimensions Length (Unit & Pruning Saw + Chain) 2045mm
Reduction ratio 17:18 (0.94)
Gearbox Lubrication
Multipurpose
Lithium-based grease
Head Angle Adjustment 0
o
Accessory
552796 Extension Pole 1000mm
Loading ...
Loading ...
Loading ...