Loading ...
Loading ...
Loading ...
32
7.2.3 Attach the squeegee
Figure 27
To attach the squeegee:
1. Hold the scrub deck firmly with one hand.
2. Align the pins on the scrub deck (Figure 27, pos 2) with the holes on the squeegee
(Figure 27, pos 1).
3. Push the left side of the squeegee in place.
4. Push the right side of the squeegee in place.
7.3 Replace vacuum hose
1. Detach the squeegee as described in 7.2.1.
2. Remove the solution tank and the recovery tank. You can see where the vacuum hose is
connected at the i-mop® Lite handle.
3. Hold the scrub deck firmly with one hand.
4. Remove the hose connector from the scrub deck.
5. Detach the vacuum hose from the connector by twisting the hose 1/4 turn.
6. Remove the vacuum hose from the i-mop Lite.
7. Now you can carefully pull the vacuum hose from the handle and unscrew the hose connector.
8. Place the new hose by following the above steps in reversed order.
9. Reinstall the squeegee.
7.4 Recommended additional cleaning
Clean the exterior of the i-mop Lite weekly with a non-abrasive, non-solvent cleaner or a clean, damp
cloth. To clean the scrub deck, remove the brushes, and then use a non-abrasive, non-solvent
cleaner or a clean, damp cloth.
7.5 Recommended service time
It is recommended to schedule a full service by one of our service partners every 500 hours.
Loading ...
Loading ...
Loading ...