Loading ...
Loading ...
Loading ...
31
7.2 Squeegee replacement
The squeegee blades come in pairs and wear out over time. When you notice the floor is no longer
being dried properly, replace the squeegee blades.
7.2.1 Detach the squeegee
1. Put the i-mop® Lite in park position (see 4.2).
2. Hold the scrub deck firmly with one hand.
3. Pull on the left side of the squeegee (Figure
26, pos 1) to remove it.
4. Pull on the right side of the squeegee to
remove it.
5. Remove the vacuum hose from the squeegee
by twisting the hose.
7.2.2 Flip/replace the squeegee blade
1. Unscrew the 6 plastic nuts on the back.
2. Take off the squeegee rear plate.
3. Once the plastic part is removed, you can easily take off the rear rubber blade.
4. Push the 6 screws through the front blade in order to remove the squeegee front plate.
5. Take off the rear rubber blade.
6. Inspect the front and rear rubber blades:
• The first time: flip the blades so the top of the blade is now facing the floor. Push the front
plate screws through the holes.
• The second time: attach a new set of blades. Push the front plate screws through the holes.
CAUTION
The special squeegee blades that contain small arrow-like shapes cannot be switched.
These need to be replaced every time.
7. Put back the plastic rear plate.
8. Screw the 6 plastic nuts on the back.
Figure 26
Loading ...
Loading ...
Loading ...