Loading ...
Loading ...
Loading ...
27
6.3 Cleaning and storage
6.3.1 Flush the system
Be sure to flush the tanks out completely. To
thoroughly flush out any solution in the lines and
valves:
1. Refill solution tank with 0.5 to 1 liter of clean
water.
2. Press the Brush and Cleaning solution and
Vacuum buttons on the control panel.
3. Use the trigger to start the i-mop® Lite and
allow it to flush the system.
6.3.2 Cleaning the tanks
1. Dispose water or cleaning solution from both tanks in an appropriate drain.
2. To clean the recovery tank thoroughly:
• Partially fill the tank with fresh water and hold it horizontally with the holes facing up.
• Tilt the tank repeatedly, thoroughly rinsing all the dirt and debris out from the tank.
3. To clean the solution tank, follow the same procedure.
TIP: Dry the tanks
Slightly open both tank caps before storage to allow the tanks to dry.
Figure 21
Loading ...
Loading ...
Loading ...