Loading ...
Loading ...
Loading ...
Controlling the Autopilot
1 From the watch face, select START > Autopilot.
2 Select an option:
• To engage the autopilot heading hold, hold a steady course, select START, and release the helm.
• To change the heading, with the autopilot engaged, select UP for starboard and DOWN for port.
• To change the steering mode, hold MENU, select Steering Mode, and select an option.
• To perform a steering pattern, hold MENU, select Pattern Steering, and select a pattern.
NOTE: You can change the steering patterns available on your quatix device from your autopilot.
• To take the helm and place the autopilot in standby mode, select STOP.
Boat Data
Streaming Boat Data
You can stream data fields from your compatible chartplotter to your quatix device. The device displays up to
three data fields per page, and up to six pages of data.
1 From the watch face, select START > Boat Data.
2 Bring your quatix device within 3 m (10 ft.) of the chartplotter.
3 Set the chartplotter to enter pairing mode.
See your chartplotter owner's manual for more information.
4 If necessary, on the quatix device, select START to modify a data page.
After the devices are paired, they connect automatically when they are turned on, within range, and the app is
open on the watch. If you need to pair with another chartplotter, in the boat data app, hold MENU and select Pair
New.
Marking a Waypoint on Your Chartplotter
You can mark a waypoint on your compatible chartplotter using your quatix device.
1 From the watch face, select START > Boat Data.
2 Select START > Mark Plotter Wpt.
GNT
™
10
Streaming GNT 10 Data
Before you can stream data fields from your compatible GNT 10 transceiver to your quatix device, you must
download the GNT 10 app (Connect IQ Features, page 87).
1 From the watch face, select START > GNT 10.
2 Bring your quatix device within 3 m (10 ft.) of the transceiver.
3 Set the transceiver to enter pairing mode.
See your transceiver owner's manual for more information.
4 If necessary, on the quatix device, select START to modify a data page.
The quatix device displays up to three data fields per page, and up to six pages of data. After the devices are
paired, they connect automatically when they are turned on, within range, and the app is open on the watch.
TIP: To pair your quatix device with another transceiver, from the GNT 10 app, hold MENU and select Pair New.
Fusion-Link
™
App
You can use the Fusion-Link app on your quatix device to control the audio playback on your Fusion
®
device.
Marine Activities 11
Loading ...
Loading ...
Loading ...