Loading ...
Loading ...
Loading ...
CBO-750 Hybrid Assembly Instructions
1
You are now ready to mortar the Arch to the Dome. Use the
refractory mortar provided to completely seal the space
between the Arch and Dome. You will also put some mortar
on the Front Hearth under the Arch.
You don’t need a lot of mortar; just enough to make a seal.
Place the mortar all the way around the Arch and on the
Hearth on both sides under the Arch.
2
Note: Be very careful to not get any mortar in the mounting
holes for the Arch and Door. If you do get mortar in the holes,
attempt to clean it out immediately; the bolts will not go in all
the way if mortar is present.
4
Use some mortar to finish off the install. If the Shroud
is brick or stone, you should also use mortar around the
top of the Arch. If you are using a Metal Shroud, use a
high-temperature resistant silicone on the top of the Arch
to seal the joint with the Shroud.
Note: Each year you will need to touch-up the mortar and/or
silicone for cosmetic reasons.
3
Attach the Metal Door and insert the bolts to hold it in place
(ss 1/4 - 20 x 2 1/2").
Once you have all four bolts in place, you should tighten
them, but do not force it. You should create a nice seal
between the Arch and the Dome with the mortar you used.
Note: Do not over-torque bolts or you may dislodge the
threaded inserts!
7
Loading ...
Loading ...
Loading ...