Loading ...
Loading ...
Loading ...
Parts and Components
The CBO-750 Oven Support Base must:
• be constructed of masonry or metal
• have at least the same area dimensions as the
external footprint of the Oven
You must check with your local Building Department to determine
the amount of clearance required by local building codes between
the Oven and Decorative Cover. Rating plate conforms to ANSI Cert
CSA 750 HYB C Label. CBO recommends clearance of 10 inches on
each side, 10" for the back, and 18" above. Also see the Clearances
to Combustible Construction section on Page 11 of this manual.
CAUTION: DO NOT USE ANY COMBUSTIBLE MATERIALS IN
THE CONSTRUCTION OF THE COVERING (SHROUD) OF THE
OVEN. ALL BUILDING MATERIALS USED NEAR THE OVEN,
METAL ANCHOR PLATE AND FLUE PIPE SHOULD BE
NONCOMBUSTIBLE AND NEVER MADE OF WOOD.
The Support Base surface must be flat, level and strong enough to
support the total combined weight of the Oven (Hybrid Countertop:
980 lbs | Hybrid DIY: 890 lbs | Hybrid Mobile: 1051 lbs) and the
Decorative Cover design you choose.
The two vertical support feet of the Support Base are typically made
of concrete block. The horizontal Support Base is typically made of a
4-inch-thick, steel-reinforced concrete slab. The standard height of
the horizontal part of the Support Base is 42 inches.
Note: Imagine the Oven’s Support Base as a table. The table’s
legs are concrete blocks and the tabletop is a 4-inch-thick concrete
slab. To build the Support Base, you build the support legs out
of concrete block, then on top of that leg base, you build a frame to
pour a concrete slab (the tabletop).
CAUTION: TO AVOID THE POSSIBILITY OF A FIRE,
NONCOMBUSTIBLE MATERIALS MUST BE USED IN
THE CONSTRUCTION OF THE SUPPORT BASE AND ANY
FRAMING USED AROUND THE OVEN.
Support Base
CBO-750 Hybrid Assembly Overview
CBO-750 OVENS SHOULD BE INSTALLED BY A PROFESSIONAL OR
SUITABLY QUALIFIED INDIVIDUAL.
Anchor Box with DuraVent
Anchor Plate
Bolts
Decorative Door
Insulating Blanket
Dome, Hearth (3 pieces)
& Arch
Thermometer
18-Gauge Galvannealed
Steel Plate
Cooking Accessories:
Pizza Peel & Brush
Mortar
I
nsulation Boards
* Note: Most components come pre-assembled in Hybrid units.
5
Loading ...
Loading ...
Loading ...