Loading ...
Loading ...
Loading ...
21
CARE AND CLEANING INSTRUCTIONS
7
Set the switch on the grille of the ice maker to the ‘Clean’ position. The ice maker will
automatically start and stop the cleaning cycle and 3/4 of a gallon (2.8L) of water will
automatically be added to the cleaning solution.
8
The total cleaning time will end in 49minutes. The cleaning cycle will automatically
rinsethe evaporator plate and also drain the cleaning solution and rinse the reservoir
with water.
9
After the cleaning cycle has ended check that the build-up has been removed. The
evaporator plate should be clean, shiny, and smooth to the touch. If build-up is still
visible, repeat the cleaning cycle above.
!0
Clean the ice maker’s interior, ice scoop, interior door panel and door gasket with mild
soap and water. Using two tablespoons of baking soda in 1qt (946ml) of warm water
while cleaning will help remove odors. Rinse with fresh water. Do not use any abrasive
cleaning products.
!1
Replace the front panel.
!2
Your ice maker is now clean and sanitized and may be put back into operation by
setting the switch to the ‘On’ position.
Note: discard the first batch of ice. In the unlikely event a power interrupt occurs during
the clean cycle, you need to start over from the beginning to assure complete cleaning
and rinsing of the cleaning agent from the machine.
Loading ...
Loading ...
Loading ...