Loading ...
Loading ...
Loading ...
16
OPERATING INSTRUCTIONS
Operation (turning on the ice maker)
Once the drain and water supply are connected, and the ice maker is in place
andlevelled:
1
With the switch in the ‘Off’ position, plug the ice maker into an electrical outlet.
2
Turn on the water supply line.
3
Turn the switch to the ‘On’ position.
4
Check the water inlet, drain lines, and fittings for any water leaks.
5
Check drain pump (if equipped) operation by pouring approximately 2qt (1.89L) of
water into the ice storage bin. The drain pump should activate and discharge water
(refer to ‘Drain pump’ in the ‘Installation instructions’ section).
6
Check for water leaks at all hose connections.
Evaporator
Distributor
On/Off/Clean
switch
Make sure the distributor
tubing is not in the path
of the ice slab
Front panel
Front panel screws
Grid cutter
Ice deflector
Ice scoop
mounted to
back of door
Bin level sensor
Reservoir
Evaporator
Distributor
Circulation
pump
Reservoir
drain plug
Loading ...
Loading ...
Loading ...