Loading ...
Loading ...
Loading ...
12
INSTALLATION INSTRUCTIONS
With a drain pump
If you require a drain pump for your ice maker this can be purchased separately online
at www.dcsappliances.com or by contacting the Customer Care Center.
Your drain pump will need to be installed by a DCS by Fisher & Paykel trained and
supported service technician.
After installation, ensure the 3/8” I.D. (discharge tubing) which is coiled up and attached
to the back of the ice maker is plumbed in and connected to a sanitary sewer. The
maximum lift of the drain pump is 8ft (2.44m) through the 3/8” I.D. tubing.
IMPORTANT!
This drain pump is designed to be installed in DCS by Fisher & Paykel ice makers only.
Failure to use an adequate drainage system, will result in surrounding water damage
and/or poor ice production.
Ice maker with drain pump
Vent tube goes through this
opening in the access panel.
Ice maker power cord
Drain pump
Tubing clamps
Discharge tube goes through this
opening in the access panel.
Access panel
Vent tube
Supplied screws
Drain from
ice maker
Loading ...
Loading ...
Loading ...