Loading ...
Loading ...
Loading ...
Connecting Cable TV
Toconnect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1, Plug the incoming cable into theANT 2 tN (CABLE) terminal on the back of the TV.
:_*BecausethisTVis cable-ready,youdonotneeda cableboxto viewunscrambledcablechannels.
Connectinq to a Cable Box that Descrambles All Channels
1, Find the cable that is connected to theANT OUT terminal on your cable box.
Thisterminalmightbe labeled"ANTOUT","VHFOUT"or simply,"OUT".
2. Connect the other end of this cable to the ANT 2 tN (CABLE)terminal on the back of the TV.
ANT IN ANT OUT_
t
Connectinq to a Cable Box that Descrambles Some Channels
if your cable box descrambles only some channels (such as premium channels), foltow the instructions below. You will need a two-
way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
1, Find and disconnect the cable that is
connected to the ANT tN terminal on your
cable box.
Thisterminalmightbe labeled"ANTIN",
"VHFIN"or simply,"IN".
2. Connect this cable to a two-way splitter.
3, Connect an RF cable between the OUTPUT
terminal on the splitter and the tN terminal
on the cable box.
Incoming
cable
Splitter
incoming
cable
)
Cable Box
4, Connect an RF cable between the
ANT OUT terminal on the cable box and
the B-IN terminal on the RF(A/B) switch.
incoming i,J ,,i o
cable
Spgtter
Cable Box
Switch
5, Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
Cable Box Switch
6, Connect the last RF cable between the
OUT terminal on the RF (A/B) switch and
the ANT tN terminal on the rear of the TV.
ANT IN
Splitter _ _ RF (AJB)
Cable Box Switch
After you have made this connection, set theA/B switch to the "A" position for normal viewing.Set theA/B switch to the "B" position to
view scrambled channels. (Whenyou set the A/B switch to "B", you will need to tune your TV to the cable box's output channel which is
usually channel 3 or 4.)
Loading ...
Loading ...
Loading ...