Loading ...
Loading ...
Loading ...
14 49-1000640 Rev. 0
DOOR SWING (Cont.)
11. Remove any plastic protective covering from the
stainless door panel
8VLQJD3KLOOLSVVFUHZGULYHULQVWDOOWKHVL[VFUHZV
(supplied with door panel kit) as shown in the figure
to attach the inner panel to the exterior panel.
Make sure the handle is located on the desired
side.
13. Turn the upper decorative cover 180 degrees
and snap in the lower position. Turn the lower
decorative cover 180 degrees and snap in the
upper position
14. Replace the door gasket and ice scoop.
15. Remove the upper hinge plate by pushing in and
sliding to the outside and lower hinge plate by
firmly pushing in and down as shown in the figure.
,QVWDOOWKHXSSHUDQGORZHUKLQJHSODWHVRQWKH
opposite side.
17. Replace the door panel by
installing the top and
bottom hinges with
the 4 screws.
Installation Instructions
INSTALLATION INSTRUCTIONS
Screws
Screws
1
2
4
3
Loading ...
Loading ...
Loading ...