Kenmore 11085091400 dryer

User Manual - Page 15

For 11085091400.

PDF File Manual, 56 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Choose your exhaust installation type
Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible,
B
C
.....................................F
G
T
A B
A. Standard rear offset exhaust installation
B. Left or right side exhaust installation
C. Bottom exhaust installation (not an option
with pedestal installations)
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance installations are shown.
Refer to the manufacturer's instructions.
A. Dryer
B. Elbow
C. Wall
D. Exhaust hood
E, Clamps
F. Rigid metal or flexible metal vent
G. Vent length necessary to connect elbows
H. Exhaust outlet
Optional exhaust installations
This dryer can be converted to exhaust out the right side, left
side, or through the bottom. Contact your local dealer to have the
dryer converted.
1 //
A B
A. Over-The-Topinstallation (alsoavailable with one
offset elbow)
B. Periscope installation
Fire Hazard
Cover unused exhaust hotes with one of the
following kits:
279818 (white)
279915 (graphite)
279925 (biscuit)
280102 (pacific Mue)
280103 (champagne)
280104 (sedona)
Contact your local dealer.
Failure to follow these instructions can resumt in death,
fire, eJectrical shock, or serious injury.
NOTE: The following kits for close clearance alternate
installations are available for purchase, For further information,
please call 1-800-4-M¥-I-IOME ® (1-800-469-4663).
Over-The-Top Installation:
Part Number 26-49900
Periscope Installation (For use with dryer vent to wall vent
mismatch):
Part Number 26-49901 - Less than 5" (12.7 cm) mismatch
Part Number 26-49908 - 5" (12.7 cm) to 18" (45.72 cm)
mismatch
Part Number 26-49904 - 18" (45.72 cm) to 29" (73.66 cm)
mismatch
Part Number 26-49905 - 29" (73.66 cm) to 50" (127 cm)
mismatch
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
/
U
15
Loading ...
Loading ...
Loading ...