Loading ...
Loading ...
Loading ...
EN
W415-1285 / L / 10.25.21
43
finishing
Depending on the finishing material we have allowed from 0" (0mm) to 1" (25mm) of adjustment after the 1/2"
(13mm) combustible board has been installed. Loosen the 8 screws on each finishing support. Adjust the finishing
support to the desired position.
SIDE VIEW
B A
1 1/2"
(38mm)
MAX
1/2"
(13mm)
MIN
1 1/2"
(38mm)
MAX
1/2"
(13mm)
MIN
11.7.1 finishing support adjustment
Peninsula models have one end support that can also be adjusted by loosening the two screws.
note:
Framing dimensions "A" and "B" will be affected as the finishing supports are adjusted outwards, refer to
"framing" section.
note:
Loading ...
Loading ...
Loading ...