Loading ...
Loading ...
Loading ...
W415-1953 / D / 07.20.21
EN
6
general information
This appliance has been tested in accordance with the CSA Standards for fixed and location-dedicated electric
room appliances in the United States and Canada. If you need assistance during installation, please contact your
local dealer.
note:
This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of
local codes, with the latest edition of the National Electrical Code ANSI/NFPA 70 in the United States or the
Canadian Electrical Code CSA C22.1 in Canada.
1.3 general instructions
4.6A
• Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
• The appliance may emit a slight, harmless odour when fi rst used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
• If your appliance does not emit heat when called for, consult the “operation” section of this manual for further
information.
• Use with a CSA or UL certifi ed surge protector.
• Do not route the power cord directly underneath the appliance.
This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
Model No. NEFB50H-3SV NEFB60H-3SV
Description
50” three-sided viewing
electric appliance
60” three-sided viewing
electric appliance
Voltage
120V/240V AC
Watts
Max. 1500W/3000W
Amps
Dedicated 15 AMP grounded circuit
Appliance Width
50” (1270mm) 60” (1524mm)
Appliance Height
21 1/2” (546mm)
Appliance Depth
9 1/2” (241mm)
Net Weight
77.0 lbs (35.0 kg) 88.0 lbs (40kg)
Gross Weight
113.5 lbs (51.5 kg) 131.0 lbs (59.3 kg)
As with most electronic devices, your new electric appliance has been designed to operate at temperatures
between 5°C (41°F) and 35°C (95°F). During the colder winter months, allow the appliance to reach room
temperature before turning it on.
1.2 listing approvals
• This appliance is designed to be fully recessed into an enclosure. It is capable of three unique configurations.
• Ensure to test the appliance once installed into the rough-in framing to verify all functions are performing as
intended.
• Finishing materials must be installed in front of the appliance for all installation configurations.
• This appliance can be serviced while it is in an enclosure; however, if the appliance is removed from the enclo-
sure, the finishing materials must also be removed.
4.6A
• Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
• The appliance may emit a slight, harmless odour when fi rst used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
• If your appliance does not emit heat when called for, consult the “operation” section of this manual for further
information.
• Use with a CSA or UL certifi ed surge protector.
• Do not route the power cord directly underneath the appliance.
This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
• This appliance is equipped with two blower and heater assemblies. One is in use for 120V, whereas two are in
use for 240V.
Loading ...
Loading ...
Loading ...