Loading ...
Loading ...
Loading ...
W415-1953 / D / 07.20.21
EN
20
5.0 operating instructions
• Ensure the house circuit breakers for the power supply are turned on. When initially connecting the appliance to
a power source, the appliance will make a beeping sound to indicate standby mode.
!
WARNING
Once the appliance has been hard-wired
to a dedicated 120V / 240V power supply, it is ready to operate.
This appliance is equipped with two blower and heater assemblies. One is in use for 120V,
whereas two are in use for 240V.
Power
Turns the appliance on / off.
Temperature
Control
Controls appliance temperature.
Settings:
18°C (64°F), 19°C (66°F), 20°C (68°F), 21°C (70°F), 22°C (72°F),
23°C (74°F), 24°C (76°F), 25°C (78°F), 26°C (80°F), 27°C (82°F)
and OFF.
NOTE: When setting °C or °F, the temperature control is OFF.
Holding the button for 5s will switch the temperature from °C
to °F or vice versa.
Timer
Turns the timer on / off.
Settings:
0 (--), 30 min., 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h
Heater
Control
Turns the heater and blower on / off.
Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Low heat
H2 - High heat
NOTE: Heater function can be disabled/enabled by holding
the button for 5s. When the heater function is disabled, the
“LO” will be displayed.
Blue Flame
Controls flame brightness.
Settings:
F0 - Flame off
F1 - Small flame
F2 - Medium flame
F3 - Bright flame
F4 - Brightest flame
Orange Flame
5.1 operating control panel
This appliance is equipped with a motion sensor. The display panel will turn on
when it detects motion within 8” (200mm) below the touch control panel.
note:
Loading ...
Loading ...
Loading ...