Loading ...
Loading ...
Loading ...
W415-1953 / D / 07.20.21
EN
26
finishing
1. Place the front glass into the track located inside the firebox (Fig. 6-5).
2. Tilt the front glass forward (Fig. 6-6).
3. Secure the flathead screws (supplied) through the bracket holes (Fig. 6-7).
4. Reverse these steps to remove the front glass.
Fig. 6-6
Bracket
Underside View
of Front Glass
Fig. 6-5
Track
Front Glass
B x 3 (NEFB50H-3SV)
B x 4 (NEFB60H-3SV)
6.3 front glass installation / removal
Fig. 6-7
7.0 maintenance
24.2
• This appliance will require maintenance which should be planned on an annual basis.
• Using a vacuum with a soft brush attachment, gently remove any lint, dirt, or debris from the control areas and
the vent openings on the appliance.
• For glass media, follow the installation instructions for pre-cleaning.
!
WARNING
• Always disconnect the power and allow the electric appliance to cool before performing any cleaning,
maintenance or relocation of this electric appliance. Turn controls to OFF and remove plug from outlet or turn off
the house circuit breaker to electric appliance receptacle.
• Never vacuum hot embers.
NEFB60H-3SV illustrated above.
note:
• The front glass can be cleaned with glass cleaner and using a non-abrasive cloth (supplied).
Loading ...
Loading ...
Loading ...