Loading ...
Loading ...
Loading ...
EN
W415-1953 / D / 07.20.21
23
• Risk of fire!
• Never obstruct the front opening of the appliance.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed or cracked.
• Facing and/or finishing material must never overhang into the appliance opening.
• Do not finish past the finishing edge trim. Installing finishing materials past the finishing edge trim will result
in not being able to install and/or open and close the front glass panel.
• Drywall dust may penetrate into the blower bearings, causing irreparable damage. Care must be taken to
prevent drywall dust from coming into contact with the blower or its compartment. Any damage resulting from
this condition is not covered by the warranty policy.
!
WARNING
6.0 finishing
6.1 finishing materials
Screw-safe area with max. 1” (25mm) long
screw. Do not screw more than 1/2”
(12mm) into appliance.
NEFB50H-3SV Illustrated
NEFB60H-3SV Illustrated
6.1.1 screw-safe areas
DO NOT SCREW IN THE RESTRICTED AREA AS THIS COULD DAMAGE
THE INTERNAL COMPONENTS OF THE APPLIANCE, WHICH CAN CAUSE THE
APPLIANCE TO MALFUNCTION.
Restricted screw area.
Do not screw in this area.
Display
Panel
Display
Panel
Max. 1/2”
(12mm)
Outside
Appliance
Inside
Appliance
Finishing
Material
Appliance
Loading ...
Loading ...
Loading ...