Loading ...
Loading ...
Loading ...
EN
W415-1953 / D / 07.20.21
19
electrical information
4.5 240V hard-wiring
1. Secure the appliance to the rough-in framing by installing 6 screws (supplied) through the metal brackets (Fig.
4-5).
2. Turn on the power supply and test all functions of the appliance (see “operation instructions” section).
3. Install finishing materials (see “finishing” section).
Fig. 4-3
1. Relocate the factory-installed jumper wires to join terminals 15 to 18, 16 to 17, and 12 to 19.
2. Insert the ground/bond wire to terminal 22 and the supply neutral wire into terminal 11.
3. Insert L2 wire into terminal 20.
4. Loosen terminal 19. Insert L1 wire into terminal 19 along with the jumper wire that connects to terminal 12
(Fig. 4-4).
5. Re-install the cover plate.
4.6 securing and testing
If any functions do not operate to the specifications of this manual, review wire configurations and/or call
Napoleon Customer Solutions at 1-866-820-8686.
note:
D x 1
Fig. 4-4
A x 6
Fig. 4-5
TITLE: LABEL, 240V HARD-WIRING (NEFB50/60H-3SV) PART #: W385-2366
DATE:
02.20.19_F.L.
MATERIAL: CLASS IIA-1 PERMANENT LEXAN ADHESIVE LABEL, MINIMUM THICKNESS 0.1MM, TEMPERATURE
RATING MINIMUM OF 121°C (250°F)
SPECIFICATION: BLACK AND RED LETTERING/WIRING ON WHITE BACKGROUND
LABEL SIZE: 3 1/2" (89mm) x 2 5/16" (59mm)
240V AC
REVISION: B: Flipped diagram || 05.10.19_F.L.
W385-2366 / B
JUMPER WIRE LOCATIONS VARY FOR
120V AND 240V.
LES EMPLACEMENTS DU FIL DE DÉRIVATIONS
VARIENT DE 120V ET 240V.
B
G L2 L1 L1 N
22 21 20 19 18 17 16 15 14 13 12 11
Junction Box
Cover Plate
Strain Relief
For clarity, framing and some other
components have been hidden.
Inside
Appliance
Outside
Appliance
Loading ...
Loading ...
Loading ...