Loading ...
Loading ...
Loading ...
EN
W415-1953 / D / 07.20.21
11
installation
3.2 grounding the appliance
3.3 minimum clearance to combustibles
Clearance to Combustibles
Bottom, Sides, Back, and Top
0”
3.4 minimum mantel clearances
Measurements are taken from the top of the appliance.
note:
• When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discoloration.
!
WARNING
0”
MANTEL
WALL
2 1/2”
(64mm)
TOP OF
APPLIANCE
FINISHING
EDGE TRIM
APPLIANCE
• A bonded/grounded power source is mandatory for this appliance.
• This appliance must be connected to a dedicated 15 amp circuit. The use of an extension cord is NOT
permitted.
!
WARNING
Profile View
Minimum mantel height is 0” above the top of the appliance, or 2 1/2” (64mm) above the finishing edge trim.
This is due to the reinforced framing behind the finishing materials.
note:
Loading ...
Loading ...
Loading ...