Loading ...
Loading ...
Loading ...
12
MICROWAVE OVEN CARE
Replacing The Cavity Light
Cavity Light is located at the top front of the microwave oven,
under the cover and is replaceable. Before replacing lamp, make
sure lamp is cool.
To replace the cavity light refer the following steps:
1. Use a Phillips head screwdriver to remove the 4 wood screws
securing the trim kit frame to the cabinet.
2. Using 2 people, slide the microwave oven out of the cabinet.
Unplug the microwave oven and place on a stable surface with
the microwave door and frame sitting slightly beyond the edge
of the surface.
3. Remove the 3 short screws to release the leftside cooling duct,
see below pictorial. Set screws and cooling duct aside.
4. Remove the 4 screws which fasten the trim kit frame to the
microwave oven, and set the 4 screws aside.
5. Pull the Trim Kit Frame away from the front of the microwave
to release it. Note the ‘TOP’ and ‘up arrow’ molded into the
frame, the 4 locating pins and the locating slots, set frame
aside.
6. Remove the light cover screw from the top front of the
microwave oven.
7. Remove the light cover.
A. Trim kit frame
B. Mounting hole guide
C. #7-16x15/16" at head wood screw (4)
D. Cutout ceiling
A
B
A. Cabinet
B. Microwave Oven
B
A
C
A. Leftside Cooling Duct
B. Short Screws (3)
C. Screw holes (3)
A
B
C
A. Trim Kit Frame
B. #7-18x7/16" round head sheet metal screw (4)
C. Screw holes (4)
Screw
Light cover
Top front of the
microwave oven
A
B
C
A. Trim Kit Frame
B. Locating pin (4)
C. Locating slot (4)
WARNING
Excessive Weight Hazard
Use two or more people to move and install
microwave oven.
Failure to do so can result in back or other injury.
Loading ...
Loading ...
Loading ...