Loading ...
Loading ...
Loading ...
ACCESSORIES
CEILING PANEL DUCT KIT, CK-12, CK-16
A ceiling panel kit is available for discharging
the condenser air above a drop ceiling.. The
ceiling panel duct kits are furnished with a
white vinyl coated flexible duct that allows for
convenient installation. A 2ft X 2ft ceiling
duct- panel is included to replace a 2ft X 2ft
drop-ceiling panel where the connection is
desired.
The CK-12 is available for all Air Boss models
except the 5-ton. The ceiling panel kit
consists of 8 feet of flexible duct, a 2' X 2' lay
in ceiling panel and a 12 inch duct flange that
attaches to the condenser air discharge
opening on the top of the unit. The CK-16 (for
5-ton units) consists of a ceiling duct-panel,
and a 16 inch flexible duct.
Note—Drop ceiling spaces should be
vented or large enough to handle the
warm condenser air. Check local codes to
assure compliance.
If longer runs of duct are required, table
below lists maximum duct run with no 90°
elbows. For every 90° elbow, subtract 6 feet
from the run.
Ceiling Kit Model
Flexible Duct
Diameter X
Length
Fits
PAC12
Fits
PAC18
Fits
PAC24
Fits
PAC36
Fits
PAC60
CK-12
Size/Fits
12 inch X
8 feet
No No
CK-16
Size/Fits
16 Inch X
8 feet
No
No No
Maximum Approx
Equivalent Feet
(ESP)
25
(.20)
50
(.25)
50
(.25)
50
(.25)
100
(.50)
2 x 2 CEILING
DUCT-PANEL
VINYL COATED
FABRIC DUCT
DUCT FLANGE
DUCT STRAP
DUCT FLANGE (DF-12, DF-16)
The optional duct flange allows for round flexible ducting to
be attached to the Air Boss condenser discharge.
DF-12 (12-inch diameter) fits PAC12, PAC18 and PAC24.
The DF-16 (16 inch diameter) fits PAC36 and PAC60.
DUCT FLANGE
9
Loading ...
Loading ...
Loading ...