Loading ...
Loading ...
Loading ...
29
Insignia 15"/19"/22"/24" LED-LCD TV
www.insigniaproducts.com
11 Press S or T to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
During auto channel search, your TV searches
for digital channels first. When the digital
channel search is complete, a message appears
asking if you want to search for analog channels.
Select Ye s to continue searching for analog
channels, or select No to stop searching for
channels.
12 To watch TV, press INPUT, press
S or T to
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1 or HDMI2.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator LED turns blue.
3 Press (power) again to turn off your TV. Your
TV enters standby mode and the power
indicator LED turns red.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
You can also press a direct input button to select
the video input source.
• Press TV to select TV (if your TV is connected to
an antenna, cable TV (no box), or cable or satellite
TV using a coaxial cable).
• Press VIDEO to select AV IN VIDEO.
• Press COMP to select COMPONENT IN.
•Press HDMI once to select HDMI1. Press twice to
select HDMI2.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
Note
If the Auto Input Sensing feature is turned on
(default setting), the device connected to the video
jack must be turned on to select it in the Input Source
list.
For more information, see “Turning Auto Input
Sensing on or off” on page 48.
Note
If your TV is connected to an antenna, cable TV
(no box), or cable or satellite box using a coaxial
cable, select TV to watch TV.
If your TV is connected to a cable or satellite box
using a different video connection, select the
matching video input source to watch TV.
TV
HDMI1
HDMI2
USB
INPUT SOURCE
AV
VGA
Component
Loading ...
Loading ...
Loading ...