Loading ...
Loading ...
Loading ...
EN - 12
PROBLEM PROBABLE CAUSE SOLUTION
7. The cutting means
comes into contact with
a line or electric cable
- DO NOT TOUCH THE BLADE AS IT
MAY BE LIVE AND BE EXTREMELY
DANGEROUS! Grasp the machine using
the insulated rear handgrip only and
position it at a safe distance from yourself.
Disconnect the current that powers the
severed line or mains cable and remove
the battery before freeing the blade teeth.
8. The cutting means
comes into contact
with a foreign body.
- remove the battery and:
– Inspect for damage
– Check for and tighten any loose parts
– Contact an Authorised Service
Centre for replacement or repair
damaged parts with parts having
Excessive noise and/or
vibration is experienced
whilst working
Loose or damaged parts remove the battery and:
– inspect for damage;
– check for and tighten any loose parts;
– Contact an Authorised Service
Centre for replacement or repair
damaged parts with parts having
10.
smoke whilst working
Hedge trimmer is damaged. Do not use the hedge trimmer. Immediately
remove the battery and
Contact an Authorised Service Centre.
11. Battery power
reserve is low
Severe working conditions
requiring greater
current absorption
Optimise operations
(para. 7.2.1)
operating requirements
Use a second battery or an
Decrease in battery capacity Purchase a new battery
12. The battery charger
is not recharging
the battery
Battery is not correctly inserted
in the battery charger
Check it is correctly inserted (para. 7.2.2)
Unsuitable environmental conditions Recharge the battery in places with
suitable temperatures (see battery/
battery charger instruction manual)
Dirty contacts Clean the contacts
The battery charger is not energised Check it is plugged in and the
power socket is energised
Faulty battery charger Replace with an original spare part
If the problem persists, refer to the battery/
battery charger manual
If problems persist after implementing the solution, contact your Dealer.
13. ACCESSORIES ON REQUEST
13.1 BATTERIES
D
The list of approved batteries for this machine
can be found in the "Technical Data" table.
13.2 BATTERY CHARGER
Loading ...
Loading ...
Loading ...