Loading ...
Loading ...
Loading ...
EN - 10
safety reasons replacements must be
performed by an Authorised Service Centre.
Blades displaying the code indicated
on the Technical Data table should
be used on this machine.
Given product evolution, the blades listed
in the "Technical Data" table may be
replaced in time with others having similar
interchangeable and operating safety features.
8. STORAGE
IMPORTANT The safety regulations to
follow for putting into storage are described
in paragraph 2.4. Strictly comply with these
instructions to avoid serious risks or hazards.
8.1 STORING
When the machine is to be stored away:
1. Remove the battery from its housing
and recharge it (para. 7.2.2)
2. When the cutting means has
3. Allow the engine to cool before
storing in an enclosed space
4.
5. Make sure there are no loose or
damaged components. If necessary,
replace any damaged components and
tighten any screws and loose bolts or
contact the authorised service centre;
6. Store the machine:
– in a dry place;
– protected from inclement weather;
– in a place out of children's reach;
– making sure that keys or tools used
for maintenance are removed.
8.2 STORING THE BATTERY
If the battery is not chargerd for a long period
of time, it must be kept in a cool, shaded
place without humidity, with environmental
NOTE If unused for any length of
time, recharge the battery every two
months to prolong its working life.
9. HANDLING AND TRANSPORT
Whenever the machine is to be
handled or transported you must:
– Stop the machine (para. 6.5);
– Make sure that all moving parts
have come to a complete stop
– Remove the battery from its housing
and recharge it (para. 7.2.2)
– Wear protective work gloves
– When the cutting means has
– Only hold the machine using the
hand grips and position the cutting
means in the opposite direction to
that used during operations
– Make sure that machine movements
do not cause damage or injuries.
When transporting the machine
on a vehicle, always:
– Position it so that it does not
cause a hazard to anyone
– Fasten the machine securely
with cables or chains.
10. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information to run the machine and for
correct basic maintenance operations
which can be performed by the user. Any
regulations and maintenance operations
not described herein must be carried out by
your Dealer or Authorised Service Centre.
Any operations performed in unauthorised
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
• Original spare parts are supplied
by authorised Dealers and by
Authorised Service Centres.
11. WARRANTY COVERAGE
The warranty conditions are intended for
consumers only, i.e. non-professional operators.
The warranty covers all material quality
and manufacturing defects recognised
during the warranty period by your
Dealer or Authorised Service Centre.
The warranty is restricted
Loading ...
Loading ...
Loading ...