Loading ...
Loading ...
Loading ...
EN - 11
to the repair or replacement of components recognised as faulty.
The warranty only applies to machines subjected to regular maintenance.
The warranty does not cover damages resulting from:
• Failure to become familiar with the documentation accompanying
the machine (Instruction manuals).
• Professional use.
• Carelessness, negligence.
• External causes (lightning, impact, presence of foreign bodies inside the machine) or incidents.
• Incorrect use or assembly are
prohibited by the manufacturer.
• Poor maintenance.
•
• Use of non-genuine spare
parts (adaptable parts).
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
• The maintenance operations (described
in the instruction manual).
• Normal wear and tear of consumables.
• Normal wear and tear.
• Deterioration in the appearance
of the machine due to use.
• Any ancillary expenses related to the
enforcement of the warranty, such as costs
incurred to travel to the user’s location,
transfer of the machine to the Dealer, rental of
replacement equipment or calling of independent
enterprises to perform maintenance work.
The user is protected by his or her own
national legislation. The user’s rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
12. TROUBLESHOOTING
PROBLEM PROBABLE CAUSE SOLUTION
1. Blade control lever and
safety switch operated
but the machine will not
start (mod. HT 20 Li A)
or
2. Blade control lever,
blade control locking
button and safety
switch operated but the
machine will not start
(mod. HT 20 Li S)
Battery is not inserted or
is inserted incorrectly
Make sure that the battery is
inserted correctly (Fig. 6.A)
Low battery Check the battery status and recharge
if necessary (para. 7.2.2)
Hedge trimmer is damaged. Do not use the hedge trimmer.
Remove the battery and contact
an authorised service centre.
The motor shuts
down whilst working
Battery is not inserted correctly Make sure that the battery is
inserted correctly (Fig. 6.A))
Low battery Check the battery status and recharge
if necessary. (para. 7.2.2)
The cutting means
is stationary when
the blade control
lever and safety
switch are engaged
(mod. HT 20 Li A)
or
5. The cutting means is
stationary when the
blade control lever,
blade control locking
button and safety
switch are engaged
(mod. HT 20 Li S)
Hedge trimmer is damaged. Do not use the hedge trimmer. Immediately
remove the battery and
Contact an Authorised Service Centre.
6. The cutting means
overheats whilst working
means is stationary, remove the battery
Loading ...
Loading ...
Loading ...