WVW51UC6LS User Manual

Loading ...

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease lters frequently

according to the following instructions. Replace grease

ltersbefore operating hood.

Exterior Surfaces

To avoid damage to the exterior surface, do not use steel wool

or soap-lled scouring pads.

Always wipe dry to avoid water marks.

Cleaning Method:

■ Liquid detergent soap and water or all-purpose cleanser

■ Wipe with damp soft cloth or nonabrasive sponge,

andthenrinsewith clean water and wipe dry.

Metal Grease Filter

1. Remove the lter by pulling the spring release handle

andthen pulling down the lter.

2. Wash metal lter as needed in dishwasher or hot

detergentsolution.

3. Reinstall the lter by making sure the spring release handles

are toward the front. Insert aluminum lter into upper track.

4. Push in spring release handle.

5. Push up on metal lter and release handle to latch into place.

Non-Vented (recirculating) Installation Filters

The charcoal lter is not washable. It should last up to

6monthswith normal use. Replace with Charcoal Filter Kit. See

the “Assistance or Service” section to order.

To replace charcoal lter:

1. Remove metal grease lter from range hood.

See“MetalGrease Filter” in this section.

2. Bend spring clips away from metal grease lter.

3. Place charcoal lter into top side of metal lter.

4. Bend spring clips back into place to secure the

charcoallterto the metal lter.

5. Replace metal grease lter. See “Metal Grease Filter”

inthissection.

Replacing a LED Lamp

The LED lights are replaceable by a service technician only.

Seethe “Warranty” section for service contact information.

A. Spring release handle

Loading ...

User Manual - Page 11