Loading ...
Loading ...
Loading ...
EN
W415-2978 / A / 10.07.21
23
1. To install the appliance face fl ush with the fi nished surface, position the framework to accommodate the
thickness of the fi nished surface.
2. Remove the 4 screws (FIG. 13).
3. Install the 4 nailing brackets on both sides of the appliance, and secure to the 2x4 framing.
8.0 nailing tabs and strips
8.1 nailing tab installation (located in manual baggie)
8.2 nailing strip installation
1. Remove the nailing strip from the back side of the carton sleeve.
2. Remove the 2 screws from the outer top edges of the nailing strip.
3. Place the nailing strip in place and secure with the 2 previously removed screws (FIG. 14).
The tabs will facilitate the installation of either a 1/2” (12.7mm) or 3/4” (19.1mm) fi nished surface thickness.
note:
FIG. 13
FIG. 14
Loading ...
Loading ...
Loading ...