Loading ...
Loading ...
Loading ...
20
EN
www.napoleon.com
N415-0541 JUL 17.20
N570-0087 (1/4” -20 X 7/8”)
(Pre-installed at factory.)
APPLY A DAB OF SILICONE
TO EACH FLANGE TO
SECURE IN PLACE.
x4
This grill is designed for masonry, NON-COMBUSTIBLE enclosures only when not installed with zero clearance liner and
must be installed and serviced by a qualied installer to local codes.
1. Aach the side mounng brackets to each side of the grill using (4) 1/4 - 20 x 7/8” screws (N570-0087). Pre-
installed at factory.
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each
wing of the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounng brackets. Connect the ex
supply line to the ng at the end of the manifold.
4. The enre installaon must be leak tested before operang the unit.
Loading ...
Loading ...
Loading ...