Loading ...
Loading ...
Loading ...
Page 12
TROUBLESHOOTING
WARNING:
Always wear safety
goggles or safety glasses with side
shields during power tool operations, or
when blowing dust. If operation is dusty,
also wear a dust mask.
WARNING:
Do not at any time let
brake uids, gasoline, petroleum - based
products, penetrating oils, etc. come in
contact with plastic parts. Chemicals can
damage, weaken or destroy plastic, which
may result in serious personal injury.
MAINTENANCE
1. Inspect the reciprocating saw, the
trigger switch and the accessories for
damage.
2. Check for damaged, missing, or worn
parts.
3. Check for loose screws, misalignment
or binding of moving parts, or any other
condition that may affect the operation.
4. If abnormal vibration or noise occurs,
turn the tool off immediately and have
the problem corrected before further
use.
5. Detach the battery from the saw before
cleaning or performing any maintenance.
Using compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools
using compressed air.
PROBLEM POSSIBLE CAUSE SOLUTION
The tool does not work.
The battery is depleted. Charge the battery.
The tool or the battery is
overloaded.
Decrease the load on the
tool and restart the tool.
The tool or the battery is
overheated.
Cool the tool and battery
and start the tool again.
Cutting is difficult. Saw blade is worn out. Replace the saw blade.
Loading ...
Loading ...
Loading ...